PU-20KX10KTXX 2000V 10kA SPD Surge Protective Device
- 90-305 Vac Working Input Voltage
- 15 kA Maximum, 10 kA Nominal (15 strikes) Surge Current Rating Using Industry Standard 8/20us Wave
- UL1449 Type 4, EN 61643-11 – Surge Protective Devices T2 & T3
- IEEE C62.41.2 Location Category C High
- High Temperature, 85℃ Maximum Ambient
- Flameproof Plastic Enclosure
- IP66 Waterproof
- Compatible with Inventronics LED Drivers
Descriptions：
The PU-20KX10KTXX is designed to be used in conjunction with Inventronics LED Drivers to provide an additional level of surge and transient protection. It can be either Series or Parallel circuit connection, with Max. 10kA 2000V level of protection.
Models：
| Certification | Wiring Configuration (1) | Up (Max Clamped Voltage) | Gas Discharge Tube | Indicator Light(2) | Rated Load Current | Model Number |
| UL | Parallel | 1600 V | N | N | / | PU-20KS10KTTN |
| UL | Series | 1600 V | N | N | 15 A | PU-20KD10KTTN |
| UL, CE, DEMKO | Parallel | 2000 V | Y | Y | / | PU-20KS10KTVA |
| UL, CE, DEMKO | Series | 2000 V | Y | Y | 15 A | PU-20KD10KTVA |
| CE, DEMKO, DM with Single- Insulation Wire | Series | 1600 V | N | Y | 15 A | PU-20KD10KTSL |
| CE, DEMKO, DM with Double-Insulation Wire | Series | 1600 V | N | Y | 15 A | PU-20KD10KTSL-FT01 |
| (none – bracket) | / | / | / | / | / | BRU-20KS10KT(3) |
Notes：
(1) Dual-port models are designed to interrupt power to the driver if the surge protector is disabled by an
excessive surge (TCO open). If no interruption is desired, choose a single-port model or use the alternate connection of a dual-port model described under “Wiring”
(2) Models with indicators glow green to show that protection is active.
(3) The BRU-20KS10KT is an optional bracket which used to fix the surge protector to the housing and it can be ordered separately. The order code is 10B040302X-00.
